A deck makeover is a project that can repay you with delight and pride every time you step into your backyard.  By following three simple steps – one, clean; two, treat and three, deckcessorize — you can transform an uninviting deck into an outdoor oasis for family and friends.   

1.  CLEAN

Cleaning can reverse years of neglect, removing dirt, mildew, old weathered coatings, and that dark gray color caused by exposure to the elements.  A thorough cleaning helps ensure the best performance from your finish.  You wouldn’t wax a dirty car, so don’t try to skimp on the cleaning step.

There is a range of cleaners available to handle specific deck conditions.  A deck wash will remove dirt, mildew and similar soils.  If your deck has a coating on it, you’ll need a heavy duty cleaner or even a deck stripper.  Redwood, cedar, mahogany and other high extractive woods also have different natural characteristics than pressure-treated pine, and they need a cleaner specifically formulated for them.  Before you begin your cleaning step, check out the Thompson’s™ Water Seal™ Web site at www.thompsonswaterseal.com to find the best cleaner for your job (not to mention a wealth of other helpful information.)

To make the job easier, look for deck cleaners that are ready-to-use.  These may be applied with a brush, roller or sprayer.  Depending on your cleaner and your deck, you may need to scrub the surface lightly with a synthetic, stiff-bristled brush.  (Be sure to read and follow all the instructions on your cleaner.)  After rinsing off the cleaner, check to see if there are any stubborn spots, and reapply as needed. 

2.  TREAT

This second step, treating the deck with a waterproofing coating, enhances the beauty of the wood and protects it at the same time.  For the fastest makeover and the highest level of water protection, try Thompson’s^® Water Seal^® Advanced waterproofers.  This patented line can be applied two hours after cleaning a surface, making a one-day deck makeover possible.  You can choose clear protection with Thompson’s^® Water Seal^® Advanced Natural Wood Protector, or protection and sheer color with the Thompson’s^® Water Seal^® Advanced Tinted Wood Protector.

A paint pad attached to a long handle is an ideal tool for applying a waterproofer to a large, open surface, whether it’s a deck or a fence.  It works the product into the wood and greatly reduces the need for bending and kneeling.  For railings, built-in seating or other smaller areas, use a 2-inch brush.  Allow your deck to dry for 12 hours, and it’s time for step three.

3.  DECKCESSORIZE

Outdoor decorating is one of the hottest home improvement trends, so there has never been a broader or more stylish array of outdoor décor products.  There are even lamps and fabrics designed specifically to be left outdoors on the deck or patio, and deck storage containers for items you don’t want to leave uncovered. 

When choosing furniture and accessories, consider the location of the deck.  For instance, if your deck was built beneath trees to take advantage of the shade, look for lighter furniture, or use bright cushions to counteract dark corners.  If the deck is immediately off the house, you’ll want to coordinate with the colors of your home’s exterior.  (If you have any waterproofer left over from the deck, you can use it on unfinished wood chairs or planters for a truly custom look.)

Now comes the reward — relax and enjoy the beautiful getaway in your own backyard.  Your deck should be protected from water damage for two to three seasons, and you don’t have to tell anyone that it was as easy as one…two…three!

image and article provided by Karla Neely for Thompson’s Water Seal

Post from: Keeping the Castle